Hello! We are in need of an engineer/illustrator to create specific
blueprint drawings of a product we have created. This product is
currently patent pending, and we are looking for production based
drawings, to include the measurements, different angles, and specs to
assist the manufacturers with production.
We have some very basic specs and illustrations already detailed in
the attached files below, but we are looking for an even more detailed
version of these drawings. The attached files should be enough to go
off of to complete this work, but feel free to tweak anything that you
feel needs to be adjusted, as we are not spec minded or engineers by
any stretch of the imagination :)
The two concepts are for playing card displays that mount flush to the
wall using screws. They will be made of plastic acrylic. The outside
box will be black acrylic, while the actual card holders will be clear
plastic acrylic. One display will hold 10 decks of cards, and should
pivot 360°- allowing for viewing of the front, back, and both sides.
The second, is a "magazine style" and will hold 15 decks, stacking
somewhat on top of each other, pivoting on the right side of the clear
Lastly, we are going for a "snap together" style assembly, so ideally
the product can go together quick and easy. The peg design has been
detailed in the images below, but if you have questions, just ask!
We will need detailed drawings of every inch of the displays,
including, ALL measurements and specs.